|
Author
|
Topic: Frame Diagram-65-66
|
juiceman39
Journeyman Posts: 61
From: wadsworth, Oh USA
Registered: Jul 2005
|
posted 08-13-2005 07:19 PM
 
Does someone have a 65-66 frame diagram. I bought one on ebay-but I cant read five of the measurements. I dont know where this one page is out of, does someone know what book this is in-maybe I can get a better copy. I need the diagnal measurement between the rear frame rails(LH front to RH rear).Diagnal between rear of front rail(RH) to front of opposite rear rail(LH). Measurement from rear of front rail(LH) to front of rear rail(LH) thanks
|
kcode
Gearhead Posts: 3415
From: alvaton,ky,usa Suburb of Bowling Green, M&M #79, MCA #29208
Registered: Jun 99
|
posted 08-13-2005 09:20 PM
The drawing you are loking for is in the Ford shop manual. The dimensions are rather difficult to apply, unless you have an unmolested underbody. All dimensions are referenced from existing holes in the rails that were used during the original assembly fixtures. But here they are:Diagonal between rear frame rails: 61.55 in Left front rail to rear of same rail: 73.78 in Diagonal right front rail at rear to the Left rear rail front: 59.33 in Hope it helps ------------------
Mike Golliver
MCA Gold Card Judge-Modifieds
65 Kcode coupe 347 stroker modified 5-speed MCA Retired
66 convertible-3 dueces and a 5-speed with a 289
01 Mustang GT Convt
05 F-150 4x4 CrewCab
|
juiceman39
Journeyman Posts: 61
From: wadsworth, Oh USA
Registered: Jul 2005
|
posted 08-14-2005 06:24 PM
Thanks, kcode
|
randyb67
Journeyman Posts: 17
From: Hampstead, NC, USA
Registered: Aug 2005
|
posted 08-20-2005 02:39 PM
I feel your pain on buying crappy copies from ebay.Good luck Im doing the same thing except im starting in the front of the car. I hope you have a better platform to statrt from because there isnt very many measurements on the ford shop manual. Take plenty of measurments before you cut!! Good luck to you Randy
|
gmliebau
Gearhead Posts: 691
From: Port St. Lucie, FL
Registered: Jan 2004
|
posted 08-20-2005 03:33 PM
I know you got your questions answered, but...http://www.treasurecoastmustangs.com/64-65framespecs.jpg
|
juiceman39
Journeyman Posts: 61
From: wadsworth, Oh USA
Registered: Jul 2005
|
posted 08-20-2005 08:18 PM
Thanks, this diagram has even more measurements.
|
