No leverage - Mustangsandmore Forum Archive

Brought to you in part by:

M&M Restoration & Tool Supply Store

NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.

Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.

Mustangsandmore Forum Archive

'64 1/2 to '68 1/2 -- The Classic Mustang

No leverage

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author

Topic: No leverage

Mustangcookie
Journeyman

Posts: 4
From: Williamsburg, IA USA
Registered: Aug 2005

posted 08-17-2005 12:27 AM

Good evening,
On the pass. side of my 66,the lever to lock/unlock the top mechanism pivots on a bolt that (to make a long story short)is broken off. the top needs to be replaced in the future but it is not THAT bad. What I was wondering was if there was a way to get to the bolt without taking the top completely off. I have to get to the bolt from the top to get an extractor in it or so I believe. Any advice would be appreciated.

Thanks to you all

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Ultimate Bulletin Board 5.47d

[Build a free Mustangsandmore.ws Home Page!]
[Posting Pictures]
[About M&M][Members' Pics]
[M&M Conventions] [M&M Mug Shots] [Tech Articles]
[M&M Bookstore] [M&M Restoration & Tool Supply Store]