|
Author
|
Topic: Quarter window glass replacement-Help?
|
Tony Soprano
Journeyman Posts: 36
From: Tacoma,WA USA
Registered: Jul 2005
|
posted 12-17-2005 06:00 PM
 
I've been putting this off for some time, but I decided to try to change my quarter windows in my 67 Coupe (chrome is pitted).
I have the 67 Ford shop manual, which talks about removing the two upper window stops, and then removing the window. (Page 17-55)
There is also a diagram (Page 17-43, Fig. 10), but I'm a little unclear on how the window is going to come out. I have it loose from the regulator, and when I take it to full up position, there doesn't seem like there will be enough wiggle room to disengage the window from it's tracks. Obviously, the roof is in the way off taking it straight up so I'm hoping someone can clarify this for me.
Then, hopefully, I'll feel stupid and it will be clear to me.
By the way, I already did a search and found very little info.
Thanks!
|
Tony Soprano
Journeyman Posts: 36
From: Tacoma,WA USA
Registered: Jul 2005
|
posted 12-17-2005 08:30 PM
Nevermind, I figured it out.
I just took out the 3 bolts that hold the window guide assemby, pivoted it forward and slipped the old window out.
Now getting it all back together might be a different story!
| |
