|
Author
|
Topic: BB 4-spd stuff and what should it cost?
|
68 S-code GT
Gearhead Posts: 3835
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 12-29-2005 06:58 PM
 
Yes,I’m going to put a 4-spd back in the fastback and would like to know what some of this stuff should cost. I pretty much know what to look for but I’ve seen what some of this goes for on Ebay. It’s scary what they get for some of this stuff. I have a lead on a bell, plate, inspection cover and a Z-bar that I think is a descent price but I have to figure in shipping and I haven’t seen the parts yet. I would like to get some feedback on what the right price should be for things. I have the pedal setup and a trans I can use so the rest I will have to buy. Some stuff I can get new and can price that stuff but it’s those used parts that I don’t know about.
------------------
Ed S. 68 S-code FB GT 4spd(now C6)/3.25 PS PDB
68 J-code(now 289) Cp Sprint"B" C4/3L00-9" PDB PS AC Bla-Bla-Bla
99 F150 XLT Ext/cab, 4X4, 5.4L, 3L55
|
427Fastback
Gearhead Posts: 530
From: N.Vancouver.B.C
Registered: Jan 2005
|
posted 12-29-2005 08:57 PM
I have heard all the clutch linkage parts are re-produced now.....I just checked Tony Branda and they have the Z-bar for the B/blocks for 89.95..I think the frame bracket is pretty much the same as a small block except it uses a bigger diameter pin and bushing.A new bushing could be made to suit. Cory ------------------
68 Fastback 427MR 4 spd.Deluxe interior,8000 tach,140 speedo,am/fm,tilt.
|
68 S-code GT
Gearhead Posts: 3835
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 12-29-2005 09:42 PM
Any idea on a C6OA-6394-B or D bell housing? I think it is the one with the hump or bulge and is for the 11 1/2" clutch. I got a price for a bell, plate and inspection cover for 150 and a used Z-bar for 50. If they are in good shape I would be interested. Are these descent prices for this stuff?
|
427Fastback
Gearhead Posts: 530
From: N.Vancouver.B.C
Registered: Jan 2005
|
posted 12-29-2005 10:19 PM
That sounds like the right bellhousing.Price sounds ok also as he has the inspection cover for it.The bellhousing is cast Iron so not much can happen to that.It is not un-commom to find the inspection cover(threaded) holes in the housing cracked..I would scoop the stuff up....
Cory ------------------
68 Fastback 427MR 4 spd.Deluxe interior,8000 tach,140 speedo,am/fm,tilt.
|
