|
Author
|
Topic: drum/shoe size???
|
68 Coop
Gearhead Posts: 5847
From: Mesquite, NV. 89027
Registered: Oct 2004
|
posted 01-20-2006 10:33 PM
 
It's been so long since I did my brakes, I've forgotten what size to get. The Zone has some at 10 1 3/4, and they want paid before ordering, so I want to be positive. Does anyone know for sure what size to get, to save trying to take back my mistake. Thanks for any time and info on this, it's greatly appreciated.------------------
William
If you think there's good in everybody, you haven't met everybody. 68 Coupe
289
C4
2:79 rear gears
|
jay67fast
Gearhead Posts: 146
From: Boca Raton, Florida,U.S.A.
Registered: Nov 2004
|
posted 01-20-2006 10:58 PM
68 COOP,
Here's the lining dimensions right out of the manual:
ALL 8CYL (EXCEPT 390)
FRONT REAR
Primary 2.25x8.43 1.75x8.43
Secondary 2.25x10.82 1.75x10.82
Jay67fast
|
exlocal
Gearhead Posts: 1552
From: hacienda hts., CA, USA
Registered: Dec 2004
|
posted 01-20-2006 11:02 PM
Are you looking for drum size?My 67 Factory manual shows drum diameter as 10, which I assume is inches. It also shows boring limit as 10.060 for 8 cylinder models. ------------------
reliving youth
|
68 Coop
Gearhead Posts: 5847
From: Mesquite, NV. 89027
Registered: Oct 2004
|
posted 01-20-2006 11:16 PM
Thanks Guys, that's what I needed.------------------
William
If you think there's good in everybody, you haven't met everybody. 68 Coupe
289
C4
2:79 rear gears
|
