|
Author
|
Topic: 1968 with 351C 2v exhaust question
|
travs69
Gearhead Posts: 150
From: Bethalto, IL, USA
Registered: May 99
|
posted 03-05-2006 07:52 PM
 
Anybody have any exhaust recommendations? We were going to run the factory exhast manifolds (just to get it up and running) but they will not fit in the 68.
Thanks
|
lonewolf
Gearhead Posts: 419
From: Colorado; M&M #3117
Registered: Jul 2003
|
posted 03-05-2006 11:26 PM
Might want to check with the header suppliers and see if they have engine swap headers available. What tranny and are you running power steering ? I have a set of Hooker SuperComps in my 68 with a 351C-4V running a manual tranny and manual steering.------------------
Lonewolf
1968 Coupe in Pieces
99 1/2 F250
FFR MkIII
|
travs69
Gearhead Posts: 150
From: Bethalto, IL, USA
Registered: May 99
|
posted 03-06-2006 12:07 AM
4-speed and no power steering.
|
427Fastback
Gearhead Posts: 530
From: N.Vancouver.B.C
Registered: Jan 2005
|
posted 03-06-2006 02:11 AM
Same engine bay as a 69/70 and they fit in there.My brothers 67 coupe had a 351C 4V with the manifolds..Could be wrong mounts or manifolds.Cory ------------------
68 Fastback 427MR 4 spd.Deluxe interior,8000 tach,140 speedo,am/fm,tilt.
|
travs69
Gearhead Posts: 150
From: Bethalto, IL, USA
Registered: May 99
|
posted 03-06-2006 10:49 AM
Thanks... I thought the bays were the same.
|
68 S-code GT
Gearhead Posts: 3835
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 03-07-2006 09:03 AM
quote:
Originally posted by 427Fastback:
Same engine bay as a 69/70 and they fit in there.
Ditto!
|
