|
Author
|
Topic: rear frame rails
|
683024v
Journeyman Posts: 16
From: Indiana
Registered: Jun 2005
|
posted 04-25-2006 04:49 PM
 
My horse is in need of rear frame rail exntensions. Is this some thing that can be done in the average home garage? Or is a uni-body rack needed?Thanks
Bill
|
kcode
Gearhead Posts: 3415
From: alvaton,ky,usa Suburb of Bowling Green, M&M #79, MCA #29208
Registered: Jun 99
|
posted 04-25-2006 11:26 PM
It can be done at home if you have a good welder and alot of patience. Take good measurement of the existing rails from multiple points around the car for reference. Just make sure you cut the original rails back far enough to get into good metal to weld to.Mike ------------------
Mike Golliver
MCA Gold Card Judge-Modifieds
65 Kcode coupe 347 stroker modified 5-speed MCA Retired
66 convertible-3 dueces and a 5-speed with a 289
01 Mustang GT Convt
05 F-150 4x4 CrewCab
|
683024v
Journeyman Posts: 16
From: Indiana
Registered: Jun 2005
|
posted 04-26-2006 06:11 PM
Thanks Mike.I think I'll see if I can find a shop with rack, just to be safe. Bill
|
