|
Author
|
Topic: Looking for headers for 4spd 351W
|
mustangboy
Gearhead Posts: 1343
From: Ont, Canada
Registered: Mar 2002
|
posted 05-03-2006 11:49 AM
 
I'm thinking about swapping my 302 for a 351W but part of the problem is I can't find an "affordable" header for a 68 mustang with a manual transmission.Anyone know who makes some?------------------
68 J-Code,Sprint,306 4 speed,4.11s 13.69@101...............
66 coupe 289 4 speed, 3.20 cruiser http://mustangsandmore.50megs.com/MembersPics/mustangboy.html http://mustangsandmore.50megs.com/MembersPics/mustangboy2.html
|
CraigStephens
Journeyman Posts: 39
From: Atlanta Area
Registered: Jan 2006
|
posted 05-03-2006 02:51 PM
I used a set of long tube headers, but the left one needed to be dimpled in order to clear the stearing box. Also if you have power steering, you need a drop bracket for the rack in order for the headers to clear. Overall I am satisfied with it, but the 351W is a tight fit in the '68. If I had it to do over again, I think I would give strong consideration to a stroker kit on a 302.Craig
| |
