|
Author
|
Topic: Fix for Holley 1850 stumble and backfire
|
Aussie XAXB
Gearhead Posts: 131
From: North Olmsted, Ohio
Registered: Jan 2006
|
posted 06-07-2006 09:38 PM
 
Here is an EXCELLENT article for curing the Holley Hiccups.
http://www.hotrod.com/techarticles/53058/index.html
Steve ------------------
My Mad Max Interceptor Project http://xaxbinterceptor.tripod.com Wife's 1966 Mustang Site http://www.artisticmachine.com My Custom Part Site http://www.artisticmachine.com [This message has been edited by Aussie XAXB (edited 06-07-2006).]
|
Blacksmith
Gearhead Posts: 604
From: Front Royal, Va., USA
Registered: Feb 2006
|
posted 06-08-2006 07:01 AM
Thanks Steve,Good link!
Now I might have to get out there and rebuild my old Holley. Joe
|
Aussie XAXB
Gearhead Posts: 131
From: North Olmsted, Ohio
Registered: Jan 2006
|
posted 06-08-2006 03:45 PM
I found that article after I found out the carb on my Aussie Falcon is a Holley 1850. I was just looking for info on the carb. With as expensive as my Mad Max project is going to be I need to save some money where I can so I will be rebuilding this carb. It is an excellent aritcle.Steve ------------------
My Mad Max Interceptor Project http://xaxbinterceptor.tripod.com Wife's 1966 Mustang Site http://purplestang66.tripod.com My Custom Part Site http://www.artisticmachine.com
|
