|
Author
|
Topic: rear axle allignment
|
BenDover
Journeyman Posts: 23
From: Netherlands
Registered: Oct 2003
|
posted 09-18-2006 10:49 AM
 
Hi, I took my rear axle (was bent) to a metal shop for straightening it out.The long tube was bent forward and he could easily repair that but he ask me if there has to be a correction for camber and toe settings for the rear axle. So, must the tube ends be horizontally and vertically parallel to each other? Mustang 66
|
68 Coop
Gearhead Posts: 5847
From: Mesquite, NV. 89027
Registered: Oct 2004
|
posted 09-20-2006 01:31 AM
I would have to say Yes. If nothing else, it got you back to the top, so maybe someone who does know can answer it for ya. I just hate to see something not get a response at all.------------------
William
M&M# 4256
MCA# 64831 68 Coupe
289
C4
3:55's/Trac-Lok
|
Pierre
Gearhead Posts: 661
From: Near Paris, France
Registered: Apr 2002
|
posted 09-29-2006 04:05 PM
The Ford Shop manual doesn't give any but here is what my car (which our local specialist considered fine)
reads at:Camber: -0°05'to -0°20'
Toe: +0°06 to -0°07 For whatever this is worth....
|
