|
Author
|
Topic: WILL IT FIT????????
|
johnmustang
Gearhead Posts: 6748
From: British Columbia , Canada
Registered: Nov 2001
|
posted 09-27-2006 02:27 PM
 
Will the hood off of a 69 coupe fit a 69 Mach1 ?Also what other parts off of a coupe will fit a Mach1 ? What size rear end and what possible gear ratio would be in a 69 coupe 6 cyl ? ------------------
JOHN
65 FASTBACK 2+2...14.44 @ 107 MPH
87 TAURUS WAGON
03 F150 XLT SUPER CREW 4X4 SHORT BOX
Member: PACIFIC COAST MUSTANG ASSOCIATION
Member:Vancouver Island Mustang Association
M&M #1710
65 FASTBACK
2003 F150 XLT SUPER CREW 4X4
|
planomustang
Gearhead Posts: 103
From: Plano,TX
Registered: Jul 2004
|
posted 09-27-2006 02:33 PM
The entire front clip of a '69 Coupe will fit a '69 Fastback. You will have to drill holes and cutout holes for the hood scoop and turn signals.rk
|
Rory McNeil
Gearhead Posts: 1889
From: Surrey, B.C. Canada
Registered: Nov 2000
|
posted 09-27-2006 06:50 PM
As mentioned, the front sheel metal will bolt on. As for the rearend, if it is a 200 6 cyl, it will have a 6 3/4" integral rearend with 4 lug axles, if it is a 250 cube 6, it will have a 8" with 5 lug axles. The gear ratios would likely be in the 2.79/2.80, 3.00 range, with 3.20`s possible, but unlikely.------------------
78 Fairmont 428 4 speed 10.20@131.5mph 1.32 60 foot
80 Fairmont 302 5 speed 12.8@105mph
85 Mustang NHRA M/Stock 302 5speed. 12.36@106.88mph 1.63 60 foot
59 Meteor (Canadian Ford) 2 dr sedan 332, auto
74 F350 ramp truck 390 4spd
|
Scott H
Gearhead Posts: 1480
From: Chicago area
Registered: Mar 2005
|
posted 09-27-2006 09:12 PM
windshields are different, as are the inside pillar post trim pieces
|
pmhvps
Gearhead Posts: 734
From: Burlington,ON,Canada ,in the heart of the Golden Horseshoe.
Registered: Oct 2003
|
posted 09-29-2006 02:06 PM
Hey Rory? Did '69's come with 200's? I thought 200's were matched with a 7 1/2.
Mike.
|
mustangs68
Moderator Posts: 27681
From: Hampton Va MCA#39406 M&M #12 Member Mustang Club of Tidewater
Registered: May 99
|
posted 09-29-2006 02:27 PM
did't Ford use 250 CID after 68?
Sam
|
SteveLaRiviere
Administrator Posts: 48752
From: Saco, Maine
Registered: May 99
|
posted 09-29-2006 07:57 PM
They used both the L code 250 and the T code 200 until 1970. '71 was the year that started having only the 250 available.------------------
'70 Mustang Mach 1 - '70 Mustang Convertible - '72 Mustang Sprint - '94 F-150 XL
|
