carb install complete - Mustangsandmore Forum Archive

Brought to you in part by:

M&M Restoration & Tool Supply Store

NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.

Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.

Mustangsandmore Forum Archive

'64 1/2 to '68 1/2 -- The Classic Mustang

carb install complete

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author

Topic: carb install complete

65whitestang
Gearhead

Posts: 111
From: Eastern,CT
Registered: Jun 2006

posted 10-07-2006 02:00 AM

I got the carb all hooked up tonight. I switched out a Holley 650 with manual choke
to a Edlebrock electric choke. I hooked the choke positive to the starter relay. The ign lug only has voltage when the key is on.
I like this Edlebrock 500cfm carb. Some gripes are the pcv barb is on the front and the fuel line barb is up high and is comes straight out. I plan on ordering a banjo fitting that will give some more clearance for the airfiler. Thanks to everyone who posted ideas and suggestion in choke/monte carlo bar thread....

------------------
Bill M
Mystic,CT
65 Convertible
9"rear,5speed ,11"clutch,currently powered by a 302

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Ultimate Bulletin Board 5.47d

[Build a free Mustangsandmore.ws Home Page!]
[Posting Pictures]
[About M&M][Members' Pics]
[M&M Conventions] [M&M Mug Shots] [Tech Articles]
[M&M Bookstore] [M&M Restoration & Tool Supply Store]