Brought to you in part by:

M&M Restoration & Tool Supply Store

Great deals on auto restoration supplies!

.


NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.

Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.

  Mustangsandmore Forum Archive
  '64 1/2 to '68 1/2 -- The Classic Mustang
  Tune Up Info

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   Tune Up Info
jay67fast
Gearhead

Posts: 146
From: Boca Raton, Florida,U.S.A.
Registered: Nov 2004

posted 11-22-2006 03:33 PM     Click Here to See the Profile for jay67fast        Reply w/Quote
It's time to change plugs.
1967 , 289, C4, Autolite 4100 4bbl., Pertronix ignition module, A/C, otherwise stock.
I could use your opinions on:
What's the best plug (A.C. Delco, NGK, Autolite, etc.)
What's the correct plug number
What's the correct gap
I am currently running A.C.Delco R83TS plugs with a gap of .034. I didn't touch the gap when I installed the pertronix.
Car seems to be running fine---I was just wondering if I should stay with this set-up.
Thanks,
Jay67fast

Moneymaker
Administrator

Posts: 29200
From: Lyons, IL, USA
Registered: May 99

posted 11-22-2006 03:57 PM     Click Here to See the Profile for Moneymaker        Reply w/Quote
Motorcraft BSF-42 or Autolie #45 plugs gapped at .035.
Never use AC plugs in anything.
Set timing at 10-12 @600 RPM with vacuum advance disconnected.

------------------
Alex Denysenko
Co-Administrator and Moderator

NHRA/SRA member and licensed Superstock driver
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,'04 &'05
First NHRA & IHRA 289 automatic Superstock Mustang in the TENS 06-99
First SS/MA in the TENS 04-03
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28

The Barry of BarrysGrrl

Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com

Scott H
Gearhead

Posts: 1480
From: Chicago area
Registered: Mar 2005

posted 11-22-2006 03:59 PM     Click Here to See the Profile for Scott H        Reply w/Quote
Yeah, what HE said

65whitestang
Gearhead

Posts: 111
From: Eastern,CT
Registered: Jun 2006

posted 11-25-2006 01:26 PM     Click Here to See the Profile for 65whitestang        Reply w/Quote
Alex
Would this apply to my 65 with a 302 in it?
5speed,Edlebrock 500,unknown cam,Weiland intake

Thanks

------------------
Bill M
Mystic,CT
65 Convertible
9"rear,5speed ,11"clutch,currently powered by a 302

Moneymaker
Administrator

Posts: 29200
From: Lyons, IL, USA
Registered: May 99

posted 11-25-2006 01:35 PM     Click Here to See the Profile for Moneymaker        Reply w/Quote
Yes, pretty much.

------------------
Alex Denysenko
Co-Administrator and Moderator

NHRA/SRA member and licensed Superstock driver
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,'04 &'05
First NHRA & IHRA 289 automatic Superstock Mustang in the TENS 06-99
First SS/MA in the TENS 04-03
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28

The Barry of BarrysGrrl

Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2006, Steve LaRiviere. All Rights Reserved.


Ultimate Bulletin Board 5.47d

Amazon Honor System Click Here to Pay Learn More

[Build a free Mustangsandmore.ws Home Page!]

[Posting Pictures]

[About M&M][Members' Pics]

[M&M Conventions] [M&M Mug Shots] [Tech Articles]

[M&M Bookstore] [M&M Restoration & Tool Supply Store]