|
Author
|
Topic: 68 Fairlane Auto to Manual Conversion
|
Jimp
Journeyman Posts: 16
From: Hudson, MA, US
Registered: Sep 2005
|
posted 02-10-2006 04:02 PM
 
I am thinking about installing a 5 or a 6 speed in my 68. Has anyone tried this? Am I stuck trying to find a clutch pedal and linkage fronm a 68 manual car or is there a aftermarket alternative such as a hydraulic set up? Thanks
Jim
|
roger
Gearhead Posts: 533
From: ontario, canada
Registered: Aug 2000
|
posted 02-19-2006 12:02 PM
I was going to try this in my 63, but,ended up going auto O/D.
you could try dark horse performance for Hydralic clutch set up which is your easiest way o go for an odd install.
you have to send your cluth/Brake pedal assembly to them & they convert to the cable type clutch set up.
good luck
|
NCREBEL
Journeyman Posts: 15
From: Hillsborough, NC
Registered: May 2006
|
posted 11-27-2006 06:18 PM
Perogie Interprises is the company to contact. They will help you down to the bushings to complete setup with Toploader.
If you have a small block, Just use 86 -93 mustang parts.
|
roger
Gearhead Posts: 533
From: ontario, canada
Registered: Aug 2000
|
posted 11-30-2006 03:14 PM
I don;t think the clutch/brake pedals will work out of a mustang.
when i was contemplating the T-56 Fred at Dark horse found me correct pedals for my car
He may be able to locate the correct pedals fo yours too
|
