78 Monarch - Mustangsandmore Forum Archive

Brought to you in part by:

M&M Restoration & Tool Supply Store

NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.

Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.

Mustangsandmore Forum Archive

Mid Size Fords and Mercurys

78 Monarch

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: 78 Monarch
FReEK Journeyman Posts: 6 From: Union,MS Registered: Nov 2005	posted 04-12-2006 08:53 PM Will the disc off the 78 Monarch work on a 69 Fairlane?
MLariviere Moderator Posts: 4235 From: Biddeford,Me.USA Registered: May 99	posted 04-17-2006 08:27 PM You need to measure the spindles and compare them. If they are the same,they will fit. You could just use the whole spindle. You may need to change the tierod ends too.
roger Gearhead Posts: 533 From: ontario, canada Registered: Aug 2000	posted 04-24-2006 03:45 PM yes ,to all the above, use spindles, everything but, as stated, you may have to get tie rod adapters from mustangsteve.com
Bloose Gearhead Posts: 888 From: Milwaukee, WI Registered: Dec 2001	posted 04-28-2006 06:44 AM I used Granada spindles on my '68. Just used Granada outer tie rods. B-loose

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Ultimate Bulletin Board 5.47d

[Build a free Mustangsandmore.ws Home Page!]
[Posting Pictures]
[About M&M][Members' Pics]
[M&M Conventions] [M&M Mug Shots] [Tech Articles]
[M&M Bookstore] [M&M Restoration & Tool Supply Store]